FIMCO 1 1/2" 6 Outlet Standard Hydro Indexing Valve with 5,6 Zone Cams for Irrigation

The model #4006 Hydro Indexing Valve has 1 inlet and 6 outlets which are all made to fit 1 1/2″ slip fit PVC. This valve is recommended for use in a pump driven irrigation system and can run from 5 to 6 zones based on the chosen cam configuration. The standard flow stem and disc assembly requires a minimum of 10GPM. Please remember that pipe size is measured by inside diameter. This valve is made to accept 1 1/2″ pipe so the outlets and inlets will be larger than the pipe size it receives.

• There are several different sizes of inlets and outlets for this product. All are listed on Amazon. PLEASE BE SURE YOU ARE SELECTING THE CORRECT SIZE FOR YOUR INSTALLATION. Please remember that pipe size is measured by inside diameter. This valve is made to accept 1 1/2″ pipe so the outlets and inlets will be larger than the pipe size it receives. The actual diamater of the outlets and inlets are 1.9"
• Valve has 1 inlet and 6 outlets that are all made to accept 1 1/2" slip fit
• Valve comes with 6 zone cam installed and an additional 5 zone cam allowing for 5 or 6 active zones
• Supports manual or automatic operation with a controller (not included) to turn on and off the water supply (pump or solenoid)
• Requires a 1 - 1-1/2 HP pump (pump not included)